Assembly Instructions

All you need for assembly is a Phillips head screwdriver.

Lay one side piece on the floor as shown...

Align the back piece (with two large holes) with the short bottom rail and secure with 2 wood screws. 

Line up the holes in the front piece with the holes in the front rails and secure with wood screws. 

Place second side on top and secure the same way you did the first side. 

Set chair upright and place seat piece on the support rails as shown.  Secure with screws. (they will go in at a slight angle towards the sides)

Thread the seatbelt through the holes in the back piece and secure buckle.  Put the tray in place and you're ready to go!